Siemens HiPath 3000 Series Service Documentation page 766

licensing.fm
Licensing
Licensing for HiPath 3000 V9, HiPath 5000 V9
Step
Standalone or networked HiPath 3000
systems without HiPath 5000 RSM
4. Save CDB and transfer to HiPath 3000.
Note on licensing the Feature Server
>
The Feature Server can be started without a license. In this case a message indicat-
ing that licensing needs to be performed is displayed.
Given that the Feature Server receives its license from the CDB of the first node, the
licensing dialog for this node must be opened first and, as a minimum requirement,
licensing must be performed using a .gcpf file. The first node must then be added to
the HiPath 3000/5000 network. The Feature Server now has its (grace period) li-
cense.
If the Feature Server is not licensed through the first node within one hour, the server
automatically stops operating after an hour has elapsed. When the server is restart-
ed there is a new one-hour period in which to perform licensing.
Preconfiguration can be performed in preparation for installation of a HiPath 3000/
5000 network for a customer. Licensing is required for the network at the preconfig-
uration stage. If there is no valid license file available, licensing can also be per-
formed using a GPCF file.
8-16
Activity (Remarks)
Networked HiPath 3000 Systems with
Save CDB and transfer to HiPath 5000
RSM. The server transfers the CDB files
to the networked systems autonomously.
The HG 1500 boards are then registered
automatically.
Note: Unlike previous versions, this ver-
sion does not require a reset of the HG
1500 boards. as it may disrupt data trans-
fer.
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
HiPath 5000 RSM
A31003-H3590-S100-7-7620, 06/2012