Editing Uac Settings On Computer B - Siemens HiPath 3000 Series Service Documentation

Nur für den internen Gebrauch
3. Under "Permissions for ...", select the check boxes Local Launch, Remote
Launch, Local Activation and Remote Activation.
4. Then click OK to save the new settings.
h) In the dialog "vsrve Properties", click OK. The vsrv settings are now saved and the
"Component Services" dialog is displayed again.
4. Now, restart the computer to activate the user that has just been created.
Error correction
For correcting DCOM security problems, you can switch on the DCOM fault correction to get
specific information on the exact DCOM error that has occurred. Further information on DCOM
logging can also be found in the Microsoft Knowledge Base article
crosoft.com/kb/892500. ActivationFailureLoggingLevel and CallFailureLoggingLevel are two
registration keys that can be added using the Registry Hive Editor to resolve DCOM security
problems. Further information on how to activate these keys can be found in the aforemen-
tioned Microsoft KB article.
6.9.3.2.3

Editing UAC settings on computer B

If computer B does not belong to any domain, additional considerations come into play. In Win-
dows Server 2008 Variants and especially Windows Vista or later, UAC has an effect on con-
nections for user accounts without domains.
If you set up a connection to a decentralized computer through a user account that does not
belong to any domain, but which is present in the local administrator group of the decentralized
computer, then you must explicitly grant that account the rights for decentralized DCOM ac-
cess, activation and startup.
Further information on this can be found in the Microsoft Knowledge Base article
http://support.microsoft.com/kb/951016.
In addition, you must disable the decentralized UAC restrictions, since the user would otherwise
get access rejection errors if he or she is working with HiPath 3000 Manager E and using the
dialog to set up a decentralized connection to a DB Feature Server.
Deactivating the decentralized UAC restrictions
Proceed as below to deactivate the decentralized UAC restrictions on computer B:
1. Start the tool regedit.exe:
a) Click Start -> Run. The input prompt "Run" is displayed.
b) In the field "Open:", enter the following: regedit.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Startup and Administration HiPath 5000
Optimizing Operating System Settings
http://support.mi-
start_h5.fm
6-45