Siemens HiPath 3000 Series Service Documentation page 983

Table of Contents

Nur für den internen Gebrauch

Installation and administration of Plug PC for HiPath 3000 Remote Access Appliance

File properties

If you want to assign a specific IP address to your plug PC, create a file with the

myportal_net_static name:

First line contains the IP address (allowed are space, 0-9, and '.' And it must contain 3 '.')

Second line contains the network mask (optional, allowed are space, 0-9, and '.' And it

must contain 3 '.')

Third line contains the default gateway (optional, allowed are space, 0-9, and '.' And it must

contain 3 '.')

The myportal_net_static file can be created by the Windows Editor, but note that an

ending like ".txt" is not allowed. You can change the name after you created the file.

Copy the file to the sheeva's USB stick.

Connect the USB stick to the Plug PC and boot up the Plug PC by inserting it into the power

jack and connect to the Plug PC's WBM by using

that you must then enter the network settings of your plug PC and re-enter the IP address,

network mask, and gateway manually, otherwise this information will be gone after a re-

The first login screen will appear asking for a username and password. The initial user-

name and password is "admin". Once you typed this in, you will be asked to change the

Choose an appropriate password, and type it in twice into the respective fields. Once this

is done, you will get to the Plug PC's "Smart Services Assistant" main screen:

A31003-H3590-S100-7-7620, 06/2012

HiPath 3000/5000 V9, Service documentation

Smart Services Assistant for Plug PC

HTTPS ://<IP address of plug

Show Quick Links

Table of Contents