Siemens HiPath 3000 Series Service Documentation page 238

boards.fm
Boards for HiPath 3000
Peripheral boards
Switches and LEDs
X3 = LAN
connector,
8-pin RJ45
jack
Figure 3-38 IVMP4, IVMP4R
Lockout switch settings
Pressed = free (default)
●
Not pressed = locked: existing connections remain active, new connections are locked.
●
– The yellow LED lights up when all connections are ended and the board is effectively
locked.
– The yellow LED flashes when a lockout request is entered (via lockout switch or soft-
ware) but at least one call is still active.
To reset the board to the default state, activate the lockout switch twice within the first 10 s of
board startup.
3-106
2
X4
10
Lockout switch
LED (green)
LED (yellow)
X3
Nur für den internen Gebrauch
50
X1 = con-
nection to
X1
CUC/
CUCR/
CUP/
CUPR
2
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation