Siemens HiPath 3000 Series Service Documentation page 872

wclient.fm
Workpoint Clients
optiPoint 410 / optiPoint 410 S and optiPoint 420 / optiPoint 420 S
Differences between the optiPoint 410/optiPoint 420 and optiPoint 410 S/optiPoint 420 S
families:
optiPoint 410/optiPoint 420 families: All HiPath 3000/5000 features that are offered interac-
●
tively on the display, in the service menu, and on function keys are available (except for Re-
locate).
optiPoint 410 S/optiPoint 420 S families: The corresponding telephones support SIP (Ses-
●
sion Initiation Protocol). SIP is an ASCII-based signal used to set up sessions in an IP net-
work.
Features and restrictions for Internet telephony stations
The term "Internet telephony" as used in this document refers to making telephone
>
calls via IP-supported networks (Voice over IP) and signaling via SIP.
The following features for Internet telephony stations are actively supported:
CLIP (displays the calling party's station number on the called party's station)
●
CLIP (suppresses the calling party's station number on the called party's station)
●
COLP (displays the called party's station number on the calling party's station)
●
COLR (suppresses the called party's station number on the calling party's station)
●
Consultation hold
●
Hold
●
Toggle
●
Transfer (transfer after messaging)
●
DISA (Direct Inward System Access): No features may be activated for the SIP telephone
●
Inband DTMF
●
Although Internet telephony stations may not activate the following features, they may be pas-
sively involved:
Call forwarding (forwarding to an Internet telephony station is supported)
●
Conference (Internet telephony stations may be passively involved)
●
Park (Internet telephony stations may be parked; from the perspective of the Internet tele-
●
phony station, this is similar to "Call hold")
Live Call Recording (Internet telephony stations may be passively involved)
●
Whisper (Internet telephony stations may be passively involved)
●
10-48
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation