Connectivity Check; Finalize Product Configuration; Finish Ssdp Configuration; Update Sira Data - Siemens HiPath 3000 Series Service Documentation

Table of Contents

Nur für den internen Gebrauch

Installation and administration of Plug PC for HiPath 3000 Remote Access Appliance

Connectivity check

The first connectivity check has to be done by the service technician in cooperation with the

regional RSP data administrator (or respectively the Configuration/Staging Center or Partner

data administrator).

The service technician calls the data administrator to do the remote connection check and

tells him the device name configured.

The data administrator connects to enterprise server for connectivity check. Service tech-

nician is ready.

Finalizing the configuration shall always be done on the enterprise server and not on device

side. It is more comfortable and not so error-prone to be done this way. Therefore the action is

at the regional data administrator or the responsible configuration center.

This step is triggered by the call of the service technician or an e-mail from him.

Data administrator adds the customer and location data to the new device. Very important

is the correct Region due to visibility issues.

For each device, a link from SIRA to SSDP has to be created which will allow to establish an

SSDP session via connection popup menu from Equipment Explorer.

For that, the device in SIRA has to exist or a new entry has to be created. This step is not rel-

evant for devices which do not have any SIRA access at all.

Create an entry in SIRA for the new device according to the SIRA documentation which

can be found on the respectively homepage. Also your data administrator may assist.

Create a new connection type with device ID for linking to SSDP.

A31003-H3590-S100-7-7620, 06/2012

HiPath 3000/5000 V9, Service documentation

Show Quick Links

Table of Contents