Optipoint Recorder Adapter - Siemens HiPath 3000 Series Service Documentation

Nur für den internen Gebrauch
10.5.3.5

optiPoint recorder adapter

The optiPoint recorder adapter allows an external recorder or a second headset to be connect-
ed.
Warning: The called party must be informed that the call is being recorded.
1
Figure 10-51 optiPoint recorder adapter
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Assignment of both connection jacks:
1 MW6 port for recorder
2
Contacts 2+3 and 4+5 are bridged
internally.
Recorders to be connected must meet the following electrical re-
quirements:
Input impedance: >10 kΩ
Frequency progression: 300 to 3000 Hz ± 3 dB
Beep tone level: -26 dBm to -18 dBm at a 600 Ω load
Max. input level: 650 mVeff from a 600 Ω source
2 MW4 port for second headset
Pin Signal
1 Free
2 NF
3 NF
4 NF
5 NF
6 Free
Pin Signal
1 Tx–
2 Rx
3 Rx
4 Tx+
wclient.fm
Workpoint Clients
optiPoint 500
6 1
4 1
10-103