Upgrading From V8 To V9; Introduction; Upgrading A Hipath 3000 Standalone System - Siemens HiPath 3000 Series Service Documentation

exup.fm
Expanding and Upgrading HiPath 3000
Upgrading HiPath 3000
9.2.2

Upgrading from V8 to V9

9.2.2.1

Introduction

Prerequisites
The following prerequisites must be fulfilled when upgrading software from HiPath 3000/5000
V8 to HiPath 3000/5000 V9:
There are new licenses available for HiPath 3000/5000 V9.
●
HiPath 3000 V8 can also be updated to HiPath 3000 V9 without an upgrade li-
>
cense. However, in this case, only OpenScape office HX V2 can be used.
OpenScape office HX V3 can only be operated on HiPath 3000 systems that
have been updated to HiPath 3000 V9 with an upgrade license. Licensing is
performed with HiPath 3000 Manager E.
The procedure for upgrading software depending on the various scenarios is described in the
following sections.
Individual EVM announcements in the case of upgrades
In the case of an upgrade from HiPath 3000 V8 to V9, the individual announcements and mes-
sages are deleted.
9.2.2.2

Upgrading a HiPath 3000 Standalone System

Procedure
1. Upgrade all HG 1500 boards to V9.
2. Convert the customer database (CDB) and reload it together with the V9 system software.
3. Install new licenses.
The upgrade is complete.
9-32
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation