Hipath 3000Expanding; Replacing Peripheral Boards For Hipath 3800 - Siemens HiPath 3000 Series Service Documentation

exup.fm
Expanding and Upgrading HiPath 3000

HiPath 3000Expanding

9.1 HiPath 3000Expanding
The following section provides information on supplementary equipment or extensions that are
not described in Chapter 4, "Installing HiPath 3000".
9.1.1

Replacing Peripheral Boards for HiPath 3800

Caution
7
Always wear an antistatic wristband when working on the system (especially when
handling boards).
HiPath 3800 lets you remove and insert peripheral boards during operation (hot plugging). The
following startup rules apply.
Rules for removing and inserting boards
Caution
7
To ensure that the system operates without blocking, you must follow the rules in
Section 4.1.5 concerning board configuration.
Table 9-1 Startup Rules for Inserting and Removing Boards
If
Inserting new board
in free slot
Replacing board with
same or un-
derequipped board
type
9-2
Board is integrated into the system according to the rules for initial
startup (Section 4.1.5.6).
System with default numbering plan
●
The station numbers from the new board are appended (consec-
utively and in ascending order) to the numbers already assigned.
System with modified numbering plan
●
The station numbers on the new board can be in any order.
Using HiPath 3000/5000 Manager E or Assistant T, you can assign a
specific station to a port. If the number is already assigned to a differ-
ent object, you can switch both numbers.
Board is activated. The same station range is used.
Nur für den internen Gebrauch
Then
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation