Table of Contents
Advertisement
boards.fm
Boards for HiPath 3000
Peripheral boards
3.3.17
SLMA2 (for selected countries only)
NOTE
>
Danger of damage to property due to surge voltage. The required lightning protec-
tion measures must be taken for this board, see Section 2.1.2, "Lightning Protec-
tion".
Introduction
The SLMA2 (Subscriber Line Module Analog) board provides 24 analog T/R interfaces for use
in HiPath 3800.
The external ring voltage generator
voltages. RGMOD is plugged in on the reverse of the backplane of the basic and/or expansion
cabinet. The ring voltage and ring frequency are set using jumpers.
A system cabinet can be fitted with a mix of SLMA,
>
MOD has no effect on SLMA and SLMA8, as these boards generate their own ring
voltage (35 V
Front panel
Two LEDs indicating the board status:
LED (red)
●
LED (green)
●
Figure 3-60
SLMA2 (S30810-Q2246-X) (Selected Countries Only) - LEDs on the Front
Panel
3-178
RGMOD
).
eff
(S30124-X5109-X) is required for generating ring
SLMA8
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
and SLMA2 boards. RG-
Hide quick links:
Advertisement
Table of Contents
