Installing The Tapi Service Provider - Siemens HiPath 3000 Series Service Documentation

start_h5.fm
Startup and Administration HiPath 5000
Starting HiPath 5000
6.6.5

Installing the TAPI Service Provider

The TAPI 170 Service Provider is stored on the installation DVD HiPath 5000 RSM.
You will find detailed information on how to install and configure the individual installation com-
ponents in the online help for the TAPI 170 Service Provider.
1. Insert the installation DVD and open the Setup of the TAPI 170 Service Provider.
2. Confirm the welcome dialog that appears with Next.
3. The Setup Type dialog appears. The following options are available:
Single Node
●
For using the TAPI Service Provider in standalone scenarios with no more than one
HiPath 3000 system.
Multi Node
●
For using the TAPI Service Provider in networked HiPath 3000/5000 scenarios.
User-defined
●
In this case you can manually select the components to be installed.
When you select the setup types Single Node and Multi Node, the required installation
components are automatically preselected.
Setup type
Single Node
Multi Node
1 The dongle driver is only relevant to installations for which a dongle is used for licensing. When reinstalling TAPI 170
Version 2.0 or later, MAC IDs and license codes are used for the licensing procedure. The dongle driver is therefore
not required.
4. Select the appropriate option and confirm with Next.
5. The system starts to install the selected components.
At the beginning of the installation routine (the precise time will depend on the
>
installation components you selected), a dialog is displayed prompting you to
enable ACD support. Confirm this prompt with Yes.
The relevant ACD support utility can also be enabled or disabled at a later stage.
For further information, please refer to the online help for the TAPI 170 Service
Provider.
When a component is successfully installed, the associated configuration dialog opens.
You can set the required parameters here or postpone configuration until a later time.
6-30
TAPI Service CSTA Mes-
Provider TSP sage Dispatch-
er CMD
X
X
Installation component
CSTA Service
Provider CSP
– –
X X
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
1
Dongle driver Central Config-
uration Manag-
er Client CCMC
–
–
A31003-H3590-S100-7-7620, 06/2012
–
X