Siemens HiPath 3000 Series Service Documentation page 100

sysdat.fm
System Data
Dynamic Configuration Rules
Special Devices
Table 2-37 Points for Special Devices
System Interface
UCD Agent
(HPCC, OSCC)
ACD Agent
(e.g., HPCO)
ACD group
AC
Automatic AC
(IVM)
1 The associated devices must no longer be considered separately; the same applies to the incoming trunks provided for
the ACD group (at least one B channel per agent)
Trunk Interfaces
Table 2-38 Points for Trunks
System Interface
Trunk
ITSP trunks
Networking trunk
(TDM CorNet-N)
Networking trunk
(TDM CorNet-NQ)
Networking trunk
(IP)
2-60
Number of active UCD agents
application.
Number of active ACD agents, where the display of each
agent is refreshed every T seconds.
Number of ACD groups.
Number of active attendant consoles
Number of analog trunks or digital B channels which are
routed from CO to the automatic attendant at IVM.
Number of analog trunks or digital B channels to CO
Possible number of simultaneous voice channels to the
ITSPs
Number of digital B channels to other nodes or to Xpres-
sions via TDM with CorNet-N
Number of digital B channels to other nodes or to Xpres-
sions via TDM with CorNet-NQ
Number of digital B channels to other nodes or to Xpres-
sions via IP
Note: HG 1500 performance must be considered sepa-
rately.
Meaning
1
controlled by the OSCC
Meaning
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Weight
59 · C
179 / T +
65 · C
4.8
252 · F
21.9 · F
Weight
24.6 · F
23.9 · F
23.4 · F
27.1 · F
23.9 · F
VPL
Ltg
Ltg
Ltg
Ltg
Ltg
Ltg