User Interface On Rsp - Siemens HiPath 3000 Series Service Documentation

service.fm
Service
Installation and administration of Plug PC for HiPath 3000 Remote Access Appliance
12.2.13

User interface on RSP

Searching the Plug PC
1. Connect to the SSDP server and go to the Service menu item on the top right hand side
of your screen. A search mask opens.
2. Choose the SheevaPlug model in the "Model" field.
3. If known, enter the MAC address of your Plug PC into the "Name" input field.
4. Click Search on the upper right hand side. The searching process is started.
If you entered a MAC address, only your device will appear, otherwise all available Plug
PC's will be shown. They are described as "Linux Host" in the table.
5. Once you found the Plug PC you want to connect to, just click on the corresponding MAC
address and a screen with detailed information about the Plug PC appears.
The search for HiPath 3000, HiPath HG 1500, and HiPath Xpressions Compact works the
same way as described in this section.
Connecting to the Plug PC
In order to connect to the Plug PC, click on the correct tool (e.g. Manager E for
●
HiPath 3000) on the right hand bottom side of your screen.
It is also possible to start / stop your previously configured X-Tracer from this page without
●
logging into the Plug PC's Smart Services Assistant again. In order to do this:
1. Go to the "Scripts" section on the right hand bottom side of your screen again and click
on the option you want to use (e.g. Start xtracer / Stop xtracer).
2. Click Upload X Tracer to gather the collected data from your Plug PC.
12-16
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation