Installing Hipath 3000; Installing Hipath 3800; Installation Procedure - Siemens HiPath 3000 Series Service Documentation

Nur für den internen Gebrauch
4.1.2

Installation Procedure

Table 4-1 HiPath 3800 - Installation Procedure
Step
Installing HiPath 3800 (Standalone)
1. Selecting the Installation Site, page 4-4
(usually predetermined)
2. Unpacking the Components, page 4-6
3. Setting up the System Cabinets (from
Single Cabinet
Two cabinets (stacked)
Two cabinets (side by side)
4. Grounding the System, page 4-14
Checking the Grounding, page 4-19
5.
6.
7. If required: use an external main distribution frame or external patch panel,
Main Distribution Frame MDFU-E
●
Patch Panel S30807-K6143-X
●
S Patch Panel C39104-Z7001-B3
●
0
8. Loading the System Software and Installing Subboards on the CBSAP, page 4-81
9.
10.
11.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Installation Activity
Page 4-7):
Installing Boards (Configuration Notes), page 4-31
Connecting the Cable to the Backplane, page 4-51
Connecting Workpoint Clients, page 4-82
Making Trunk and Networking Connections, page 4-82
Performing a Visual Inspection, page 4-83
Installing HiPath 3800 (19-Inch Cabi-
Selecting the Installation Site, page 4-20
(generally determined by the existing 19-
Unpacking the Components, page 4-23
Mounting System Cabinets in the 19-Inch
Grounding the System, page 4-27
Checking the Grounding, page 4-30
from Page 4-66:

Installing HiPath 3000

Installing HiPath 3800

net)
inch cabinet)
Cabinet, page 4-24
inst_h3.fm
4-3