Software Upgrade Of Ip Workpoints Via The System - Siemens HiPath 3000 Series Service Documentation

Nur für den internen Gebrauch
5. The IP workpoint logs on to the gateway and is operational.
HiPath Xpressions Compact does not save local changes to IP workpoint parame-
>
ters (for example, those made via the telephone keypad or WBM access on the IP
workpoint).
If an IP workpoint is replaced because of a defect, the local changes must be en-
tered on the replacement device.
Plug&play configuration of SIP-based workpoints is not possible.
10.3.2

Software Upgrade of IP Workpoints via the System

Notes
Each of the IP workpoint types supported requires different software (image file).
The image files are usually generated with vxWorks.app. You do not have to rename the im-
age files because the files are assigned a new name when saved on the hard disk on the Hi-
Path Xpressions Compact board.
The HiPath Xpressions Compact board's hard disk has enough space for a number of black-
and-white images at once. Only IVMP4 and IVMP4N boards generate an error message when
there is not enough space for image files (currently around 200 MB is available).
Procedure
1. The SW images from the new software version are available and are loaded onto the hard
disk on the HiPath Xpressions Compact board. A separate DLI-WBM is available for this.
The DLI WBM is accessed via
https://<IP address of the HiPath Xpressions Compact board>/dli.
2. The HiPath Xpressions Compact's internal Deployment service checks whether the soft-
ware image is available in a valid format. If this is not the case, an appropriate error mes-
sage is generated for the user by the DLI-WBM.
Note: A software upgrade is only possible within a main version (example: update from
V5.1.0 to V5.3.4).
The HiPath Xpressions Compact's internal Deployment service does not support main-ver-
sion upgrades or migrations (software type changes).
3. The HiPath Xpressions Compact's internal Deployment service prompts all registered IP
workpoints that are to be equipped with the new software to start software deployment.
4. The IP workpoints in question download the software image from the HiPath Xpressions
Compact's internal FTP server and start a reboot.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Central Administration of IP Workpoints via the System
wclient.fm
Workpoint Clients
10-77