Cma - Siemens HiPath 3000 Series Service Documentation

boards.fm
Boards for HiPath 3000
Central Board
3.2.4

CMA

Caution
7
Place the central control board on a flat surface before inserting the CMA subboard.
The spacing bolts supplied guarantee the correct insertion of the subboard, so you
should always mount them (see Figure 3-7).
Otherwise you may damage the board.
Figure 3-7 CMA with Spacing Bolts
Introduction
The Clock Module ADPCM CMA (S30807-Q6931-X) is an optional subboard for the
CBRC central control boards. The CMA module is needed for special HiPath Cordless Office
configurations.
All clock module small (CMS) functions are available when you insert a CMA module.
Please refer to Page 3-41 for recommendations on CMA module implementation.
3-40
Nur für den internen Gebrauch
Spacing bolts
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
CBCC and