Siemens HiPath 3000 Series Service Documentation page 926

wclient.fm
Workpoint Clients
optiPoint 500
Table 10-7 Floating contacts on the optiPoint acoustic adapter
Pin Assign-
ment
1 Free
2 "Busy" con-
tact
3
4 "Call" con-
tact
5
6 Free
10-102
–
Signals active telephone states:
handset lifted
●
Loudspeaker activated or headset active
●
These states can be displayed, for example, on external signaling equip-
ment (LED, relay, etc.) The signaling equipment must have its own power
supply.
The contact can be loaded with up to 5 W at 24 Vac or 60 VDC.
Signals the call receipt state.
This can be used, for example, to control a secondary bell.
The contact can be loaded with up to 5 W at 24 Vac or 60 VDC.
–
Nur für den internen Gebrauch
Notes
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation