Siemens HiPath 3000 Series Service Documentation page 735

Table of Contents

Advertisement

Nur für den internen Gebrauch
2.
Enter the following data:
Field name
Mode
Transfer file
Transfer file folder
3.
Click Save to save your inputs.
The changes you made only become effective after the GetAccount service is restarted.
The ASCII transfer file is automatically saved in the specified folder and extended to in-
clude the new call data. The file is extended by one line for each call data record. Each call
data record (line) is ended with CR+LF.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Startup and Administration HiPath 5000
Meaning
Select the call data forwarding mode in this list field. The
following modes are available:
None save call charge data
The call data is not written to the transfer file. Select
this option.
Save call charge data
The call data is written to the transfer file.
The modes Export calls with calculation and Export and
save calls with calculation are intended for a future ex-
pansion.
Confirm the default file name (gcallserve) or enter a
different file name.
Confirm the default folder name (C:\coldir) or enter a
different folder name.
The transfer file is stored in the folder set here.
start_h5.fm
GetAccount
6-53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents