Logging On The Mobile Telephone - Siemens HiPath 3000 Series Service Documentation

wclient.fm
Workpoint Clients
Mobile Telephones for HiPath Cordless Office
10.13.4.2

Logging On the Mobile Telephone

Example: log the mobile telephone (station number "125") on to the DECT telephone system 2
using mobile telephone PIN "11112345".
Step
1. Switch on the mobile telephone by holding
down the hook key for at least 1 second.
You hear a confirmation tone.
2. Make the following entries within one minute.
Press the menu key.
3. Select a station
confirm.
4. Open the add-on menu.
5. Select "Register" and confirm your choice.
6. Enter the eight-digit PIN (mobile telephone
code) "11112345" and confirm.
7. Once you have logged on properly, "Base 2"
or a similar message appears and the bell
symbol "
1 Base = DECT telephone system
After logging on and releasing a handset, always turn on the out-of-range warning signal. For
more information, please refer to the operating instructions.
10-134
Entry or Key
1
(for example: Base 2) and
" flashes.
Nur für den internen Gebrauch
Handset Display
The first time you log on, the mes-
sage "Register?" appears on the
handset display. The second time
you log on, "Base 1" or a similar
message flashes.
Base 2
The following prompt appears:
"Please enter PIN:"
"11112345"
Base 2
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation