Siemens HiPath 3000 Series Service Documentation page 942

wclient.fm
Workpoint Clients
optiPoint WL2 professional/optiPoint WL2 professional S
The optiPoint WL2 professional can be used with HiPath 3000/5000 V5.0 or later.
The optiPoint WL2 professional S is the solution for SIP systems and can be used with HiPath
3000/5000 V6.0 or later.
Interfaces: WLAN, USB
●
Standards: WLAN, 802.11b (11 Mbps), 802.11g (full support of 54 Mbps), CorNet-IP, SIP
●
Configuration
Wireless connection with a WLAN access point as the link to a LAN switch
●
IP connection to the HG 1500 gateway in the HiPath 3000 system; CorNet-IP registration
●
Basic configuration via DHCP
●
Enhanced configuration via the telephone website (single telephone or using the HiPath
●
Deployment Service
Features
Telephone
Telephone with color graphic display
●
(6 lines, 128 x128 pixel resolution, 4096 colors, 3.1cm x 3.1cm)
Call animation and caller display (CLIP)/caller ID for incoming calls
●
Illuminated keypad
●
Two softkeys for dynamic access to features
●
Intuitive user prompting
●
Illuminated MWI key
●
Speakerphone key
●
Status display shows the following in standby or idle modes: date, time, battery level, RF
●
signal strength, connected access point
Status display shows the following during a call: battery level, RF signal strength, call du-
●
ration, handset lifted, CLIP/caller ID
Display for missed calls
●
Loudspeaker function
●
Displays all received calls
●
Dialing via number input, SIP-URI (professional S) and IP address (direct IP call)
●
Multi-line functionality
●
Configurable speed-dial keys
●
10-118
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation