Siemens HiPath 3000 Series Service Documentation page 160

boards.fm
Boards for HiPath 3000
Central Board
Switches and indicators
Reset/reload switch
●
– Switch pressed < 5 s = Reset activated
– Switch pressed > 5 s = Reload activated (RUN LED out indicates that a reload is in
progress)
Run LED
●
LED status meaning is explained in the following table.
Table 3-10
RUN LED
Off
On
Off
at
Off
for 0.1 s
Flashing
0.5 s on/0.5 s off
Flashing
0.1 s on/0.1 s off
1 The flashing rhythm depends on the load. The higher the system load the slower the flashing rhythm.
3-28
CBRC - LED Status Meaning
No power
Reset switch pressed briefly
Reset switch held down for more than 5 seconds (LED is extin-
guished to acknowledge that a reload has begun)
System boot
Load operation: APS in SDRAM, loadware, and card data
Normal operating state (zero load)
MMC removed or defective
Nur für den internen Gebrauch
Meaning
1
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation