Table of Contents
Advertisement
Nur für den internen Gebrauch
9.1.3.7
Wall mounting PB3000 (Not for USA:)
Caution
7
If the Powerbox PB3000 is wall mounted, you must install it in the proper direc-
●
tion and sequence.
The battery compartment including batteries and/or LUNA2 power supply must
●
be removed before installation!
Wall anchors and screws (not supplied) must be selected according to the wall
●
the device will be mounted on. The head of the screw must be big enough to fit
securely behind the mounting bracket! The wall mounting point (wall and screw)
must be suitable to support 90kg!
Proceed as follows to wall mount the PB3000:
Step
1.
Drill a hole in the selected wall, insert a wall anchor in the hole, and screw in the
respective screw.
2.
Screw the angle brackets (A) and (B) for the PB3000 onto the base of the device.
Note: In the process, pay attention to the precise seat of the angle brackets in the
centering recess. These must lock into each other.
3.
Mount the PB3000 with the angle bracket (A) on the screws.
4.
Drill a second hole in the wall for the lower angle bracket (B), insert a wall anchor
and attach the angle bracket with a screw.
5.
Reinstall the battery compartment and/or the LUNA2 power supply and reattach
the front panel of the PB3000 (see Section 9.1.3.6.1 and Section 9.1.3.6.2).
The PB3000 can now be used.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Expanding and Upgrading HiPath 3000
Activity
A
B
exup.fm
HiPath 3000Expanding
PB3000
9-23
Hide quick links:
Advertisement
Table of Contents
