Announcement And Music Modules - Siemens HiPath 3000 Series Service Documentation

boards.fm
Boards for HiPath 3000
Options
3.4.5

Announcement and Music Modules

Caution
7
Place the central control board on a flat surface before inserting a subboard. Other-
wise you may damage the board.
Introduction
The HiPath 3000 systems use different modules or boards for playing announcements and mu-
sic on hold. For details on connecting these boards, refer to the manufacturer's installation in-
structions.
The following HiPath Xpressions Compact boards support music on hold in V4.0
>
SMR-7 or later and announcements in V5.0 or later:
IVMNL, IVMN8 (HiPath 3800)
●
IVMP8 (not for U.S.) and IVMP8R (not for U.S.) (HiPath 3350, HiPath 3300)
●
IVMS8, IVMS8R (HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300)
●
For detailed information on HiPath Xpressions Compact, startup and administration,
see the manual for the product.
Overview of Boards
Table 3-179 Announcement and Music Modules
Module / Board
EXM
EXMNA (for U.S. only) S30807-Q6923-X
EXMR
3-366
Part number
S30817-Q902-B401
S30122-K7403-Z
S30122-K7403-T
Use
Used in HiPath 3550 and HiPath 3350 (wall hous-
●
ing), see Figure 3-132.
Connected via cable to X4 connector on CBCC/
●
CBCP.
Implemented in HiPath 3550, HiPath 3350 (wall
●
housing), see Section 3.4.7.
Implemented in HiPath 3550, HiPath 3350 (wall
●
housing), and HiPath 3500, HiPath 3300 (19"
housing).
Module installed directly on CBCC/CBRC (X19
●
and X20).
Wall housing: Direct connection to external music
●
source (see Figure 3-133).
19" housing: Connected via cable to cinch jack on
●
the front panel (see Figure 3-134).
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch