Xerox WorkCentre 5790 Series Service Manual page 1079

REP 11.47-171 HVF Top Exit Feed Roll
Parts List on PL 11.155
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. If fitted, undock the inserter, REP 11.82-171.
2. Remove the HVF front door, top cover, front cover and rear cover,
3. Figure 1. Raise the top tray and lower the plate beneath it.
Figure 1 Lowering the plate
Xerox® WorkCentre® 5790 Family
WARNING
GP 14. Disconnect the power cord
WARNING
REP 11.1-171.
1
Release the
two links
2
Lower the plate
4. Figure 2. Remove the circlip and bush. Remove the front magnet bracket screws.
1
Remove the circlip and
the bush
Figure 2 Feed roll front fasteners
May 2013
4-341
2
Remove 2 screws
Repairs/Adjustments
REP 11.47-171