Rep 9.5 Toner Dispense Module - Xerox WorkCentre 5790 Series Service Manual

2
3
Disconnect PJ48
Remove cable-ties
Figure 1 Waste toner full sensor
Replacement
Replacement is the reverse of the removal procedure.
Xerox® WorkCentre® 5790 Family
1
Remove the screw
4
Remove the sensor from
the black plastic housing

REP 9.5 Toner Dispense Module

Parts List on (35-55 ppm)
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the developer assembly,
2. Remove the toner cartridge.
3. Disconnect the harness PJ97 and PJ75 on the toner dispense module,
1
Disconnect harness PJ97
Figure 1 Disconnect the harness
4. Remove the securing screws from the toner dispense module,
May 2013
4-191
PL 9.17, (65-90 ppm) PL 9.15
WARNING
GP 14. Disconnect the power cord
WARNING
REP 9.2.
2
Disconnect harness PJ75
Figure
Repairs/Adjustments
REP 9.4, REP 9.5
Figure 1.
2.