Table of Contents
Advertisement
GP 28 USB Connection Mode
Purpose
To set the USB connection mode.
NOTE: In order to use the CAT/PWS tools the USB print option must be set to Xerox Copier
Assistant/PWS Service Tool.
Procedure
Perform the following:
1.
Enter Customer Administration Tools,
2.
Press the Machine Status button.
3.
Select Tools.
4.
Select Network Settings.
5.
Select USB Printer Port.
6.
Select Xerox Copier Assistant/PWS Service Tool.
7.
Select Save.
8.
Exit Customer Administration Tools,
General Procedures/Information
GP 28, GP 29
GP
24.
GP
24.
GP 29 Embedded Customer Documentation
Purpose
To explain how to print the embedded customer documentation.
Procedure
Perform the following:
1.
Press the Machine Status button.
2.
Select Information Pages.
3.
Select the relevant information page, then select Print.
May 2013
6-58
Xerox® WorkCentre® 5790 Family
Advertisement
Chapters
Table of Contents
