Xerox WorkCentre 5790 Series Service Manual page 1104

5. Figure 4, prepare to remove the BM module.
1
Fully pull out the BM
module.
2
Disconnect the ground harness.
Secure the harness to the har-
ness retainers.
Figure 4 Preparation
Repairs/Adjustments
REP 11.61-171
6. Figure 5, Release the latches.
3
Push down the left side latch
to release the slide from the
rail.
Figure 5 Releasing the slides
May 2013
4-366
2
Fully push in the slide.
1
Pull up the right side latch to
release the slide from the rail.
4
Fully push in the
slide.
Xerox® WorkCentre® 5790 Family