Xerox WorkCentre 5790 Series Service Manual page 1123

REP 11.77-171 Tri-Folder Door Interlock Switches and
Sensor
Parts List on PL 11.190, PL 11.197
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the tri-folder front and top covers,
2. Disconnect, then remove the relevant interlock switch or top cover sensor,
Top cover interlock switch
Front door interlock switch
Figure 1 Switches and sensor removal
Replacement
Reverse the removal procedures to replace the front door and top cover interlock switches and
the top access cover sensor.
Xerox® WorkCentre® 5790 Family
WARNING
GP 14. Disconnect the power cord
WARNING
REP 11.67-171.
Figure
Top cover sensor
REP 11.78-171 Tri-Folder Entry and Assist Gate Sensors
Parts List on PL 11.197
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Undock the tri-folder unit from the HVF, refer to
2. Disconnect, then remove the relevant sensor,
1.
Entry sensor
Replacement
Reverse the removal procedures to replace the entry and assist gate sensors.
May 2013
4-385
WARNING
GP 14. Disconnect the power cord
WARNING
REP 11.73-171.
Figure 1.
Assist gate sensor
LEFT SIDE VIEW
Figure 1 Sensor removal
Repairs/Adjustments
REP 11.77-171, REP 11.78-171