Xerox WorkCentre 5790 Series Service Manual page 775

Disconnect HT
lead C and G.
Disconnect PJ35
and PJ64.
Figure 4 Power and control assembly
13. Remove the main frame ground wire, refer to the
14. Remove the waste toner full sensor,
15. Unclip the wiring harness from the retaining clip and move the harness away from the
drives module, Figure 5.
Xerox® WorkCentre® 5790 Family
Disconnect
PJ2.
Disconnect
PJ25.
Disconnect
PJ18.
Disconnect PJ1.
01A Ground Distribution RAP.
REP 9.4.
16. Disconnect PJ57 on the waste toner door switch,
Figure 5 Harness and door switch
May 2013
4-37
Figure 5.
2
Disconnect PJ57.
1
Remove harness
from the retaining
clip.
Repairs/Adjustments
REP 4.1