Table of Contents
Advertisement
4.
When the specifications in the above three steps are met, the ROS is functioning cor-
rectly.
Final Actions
•
Record all changes in the log book for future reference. Perform an NVM Save,
SCP 6
Final Actions. Make one DADH and one platen copy of 82E2020/2010. Run one
copy each of internal test patterns 11, and 15, dC606. Mark these "FINISH" and write the
new NVM values on these prints and copies. Save these documents in the machine for
future reference.
•
Run sample customer documents. If necessary, use the image quality options (sharp-
ness/contrast/lighter/darker) on the UI to customize the look of the customer's copies as
detailed in IQ10.
•
Run
dC604
Registration Setup Routine.
•
Restore the customer's auditron data, using the PWS Auditron Save and Restore Tool.
•
Record any image quality options selected onto the customer copy, and save in the
machine for future reference.
REAR
AA Mini Mag Lite
Xerographics module
Figure 2 Xerographics module with AA Mini Mag-lite
Xerox® WorkCentre® 5790 Family
GP 5
then
FRONT
May 2013
3-27
Figure 3 Density reference chart 82P520/82E8230
Image Quality
IQ11
Advertisement
Chapters
Table of Contents
