Xerox WorkCentre 5790 Series Service Manual page 1354

PL 11.167 HVF BM Crease Rolls and
Support Leg
Item Part Description
1 – Lower crease roll bearing (P/O PL
11.167 Item 23)
2 – Shaft keyed clutch plate (P/O PL
11.167 Item 23)
3 413W31054 Crease roll bearing (REP 11.52-
171)
4 – Lower crease roll gear (P/O PL
11.167 Item 23)
5 – Gear keyed clutch plate (P/O PL
11.167 Item 23) (REP 11.52-171)
6 006K29391 Upper crease roll (REP 11.52-171)
7 – Lower crease roll (P/O PL 11.167
Item 25) (REP 11.52-171)
8 007E69081 Crease roll gate rack gear (REP
11.59-171)
9 – Not used
10 – Not used
11 – Not used
12 – Bearing (Not Spared)
13 007E69070 Crease roll gate rack drive gear
(REP 11.59-171)
14 007E68951 Crease roll gate rack (REP 11.59-
171)
15 020E38701 Crease roll gate front guide (REP
11.59-171)
16 020E38081 Crease roll gate rear guide (REP
11.59-171)
17 – Crease roll drive shaft (Not Spared)
18 – Crease roll gate shaft (Not Spared)
19 050E23160 Crease roll gate (REP 11.59-171)
20 – Retainer (P/O PL 11.167 Item 23)
21 – Screw (P/O PL 11.167 Item 23)
22 807E06040 Upper crease roll gear
23 – Lower crease roll and clutch
assembly (P/O PL 11.167 Item 25)
24 – Wavy washer (P/O PL 11.167 Item
25)
25 604K42120 Crease roll repair kit
Parts Lists
PL 11.167
May 2013
5-112 Xerox® WorkCentre® 5790 Family