Xerox WorkCentre 5790 Series Service Manual page 1098

9. Figure 3, remove the crease roll gate.
Figure 3 Gate removal
Repairs/Adjustments
REP 11.59-171
10. Figure 4, remove the grease roll gate front guide.
Twist the gate
to allow the
shaft to exit the
slot, then lift
out the gate
May 2013
4-360
3
Hold the baffle
away from the
guide
2
Remove screw
1
Remove two
screws
Figure 4 Front guide removal
Xerox® WorkCentre® 5790 Family
4
Remove
the guide