Table of Contents
Advertisement
Trays 1
Stock Type
and 2
Transparency (non paper backed) N
Transparency (paper backed) (3)
N
Labels (1)
N (3)
Card stock, 120 gsm to 200 gsm
Y
Card stock, 216 gsm
N
Tabs (1)
Y
Punched
Y
Envelopes (1)
Y(2)
Carbonless paper
N
Category
Group I. Common usage input.
Group II. Heavy weight common usage
input.
Group III. Light weight common usage
input.
Group IV. Common surface finished paper. 60gsm (16lb) to 200gsm (110lb.) index or equivalent (Bristol text, maga-
General Procedures/Information
GP 20
Table 9 Output stock performance
Trays 3
Duple
Bypass
and 4
Tray 5
x
Y
N
N
N
Y
N
N
N
Y
N
N
N
Y
Y
Y
Y
Y
N
N
Y
Y
N
N
N
Y
Y
Y
N
Y
N
N
N
N
N
N
N
Table 10 Input document material definitions
Material
80 gsm (20lb.) to 120gsm (32lb.) or equivalent weight range (rag bond
offset and ledger paper). This group includes 4040 paper.
121gsm (32.1lb.) to 200gsm (110lb.) index or equivalent weight range
(rag bond and ledger paper).
60gsm (16lb) to 79gsm (19.9lb.) bond or equivalent weight range (rag
bond, offset, mimo/duplicator, and NCR paper).
zine, cover, vellum, safety paper)
Hole
Booklet
Offset Stack
Staple
punch
Maker
Y(1)(2) Y(1)
N
N
N
Y(1)(2) Y(1)
N
N
N
N
N
Y(2)
N
N
Y
Y
Y
Y
Y(2)
N
Y
Y
Y
Y(2)
N
Y
Y
Y
N
Y
Y
Y
Y
N
N
N
Y(3)
N
N
N
N
N
N
N
Image Type
Impact typewriter, offset image, Xerographic image, gravure image, Letter-
press image, pencil 2H or harder, ballpoint pen, ink pen.
Impact typewriter, offset image, Xerographic image, gravure image, Letter-
press image, pencil 2H or harder, ballpoint pen, ink pen.
Impact typewriter, offset image, Xerographic image, gravure image, Letter-
press image, pencil 2H or harder, ballpoint pen, ink pen.
Impact typewriter, offset image, Xerographic image, gravure image, Letter-
press image, pencil 2H or harder, ballpoint pen, ink pen.
May 2013
6-48
Tri-
folder
Inserter Notes
N
N
(1) An increase in set scatter or set to set
registration may occur with greater than 20
sheets.
(2) LCSS only.
N
N
Must be fed with sealed edge leading. Must
not be inverted.
(1) An increase in set scatter or set to set
registration may occur with greater than 20
sheets.
(2) LCSS only.
(3) Must be fed into the output device
sealed edge first.
N
N
(1) Must not be inverted.
(2) LCSS = Top tray only.
(3) Except for hospital labels.
N
Y
(1) Pro-rata reduction in capacity with
weight of stock.
N
Y
(2) One cover may be included within the
quoted sheet capacity consistent with paper
weight of the body of the booklet.
N
N
(1) Tabs must be on trail edge when fed
from trays and bypass, but lead edge when
arriving at the output. Therefore tab stock
will be inverted before output. Hole punch
registration performance may be degraded.
N
Y
-
N
N
(1) Must not be inverted.
(2) ID #10 envelopes can be fed from tray 2
if the optional envelope kit is installed.
(3) LCSS = Top tray only.
N
N
Xerox® WorkCentre® 5790 Family
Advertisement
Chapters
Table of Contents
