Rep 5.7 Duplex Solenoid - Xerox WorkCentre 5790 Series Service Manual

REP 5.7 Duplex Solenoid

Parts List on PL 5.30
Removal
Switch off the electricity to the machine,
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the DADH rear cover, PL 5.10 Item
2. Prepare to remove the drive assembly,
Figure 1 Drives assembly
NOTE: To release the tension on the drive belts, refer to
Repairs/Adjustments
REP 5.7
WARNING
GP 14. Disconnect the power cord from the
WARNING
1.
Figure 1.
1
Disconnect 3 ground
harnesses.
2
Remove 3 self tapping
screws marked A.
3
Disconnect PJ203 and
PJ204.
4
Release the harnesses.
ADJ 5.1.
3. Remove the drive assembly,
3
Remove the drive assembly.
May 2013
4-58
Figure 2.
2
1
Release the harness.
Release the tension and
disengage the drive belts.
Figure 2 Drives assembly
Xerox® WorkCentre® 5790 Family