Xerox WorkCentre 5790 Series Service Manual page 1059

5. Figure 1, remove the idler roller.
3
Push the other bearing
though the frame to
remove the idler roller
2
Push out shaft and
remove one bearing
Figure 1 Idler roller removal
Xerox® WorkCentre® 5790 Family
1
Remove E-clip
6. Figure 2, remove the BM conveyor belt.
Replacement
Reverse the removal procedure to replace the BM conveyor belts.
May 2013
4-321
1
Release belt from the drive pulley
2
Feed the belt through
the cut-out to remove
Figure 2 Belt removal
Repairs/Adjustments
REP 11.29-171