Xerox WorkCentre 5790 Series Service Manual page 647

Table 10 11-5XX to 9XX Status codes
Status
Code UI Message Reason for Message
11-553 Stapling not available. Stapling disabled, out of service Perform
Please call for assistance
11-554 Stapling disabled, out of Stapling disabled, out of staples Perform
staples
11-555 Stapling feature requires Stapling disabled, zero / one
two or more pages page
11-560 Staple capacity exceeded. BM disabled - too many pages
Job completed without sta-
pling
11-561 BM out of staples. Please BM disabled - out of staples
replace the staple car-
tridges
11-562 BM requires two or more BM disabled - zero/one page
pages
11-563 BM is unavailable. Please BM disabled - out of service
call for assistance
11-564 No message Bin status message received
from the finisher indicating bin 0
out of service
11-565 No message Bin status message received
from the finisher indicating bin 1
out of service
Xerox® WorkCentre® 5790 Family
Status
Reference / Action Code UI Message
11-050-110, 11-566 No message
11-360-110 RAP for
2K LCSS, 11-050-
120, 11-360-120 RAP
for 1K LCSS, 11-050-
120, 11-360-120 RAP
for HVF
11-050-110, 11-570 Finisher bin 0 full
11-360-110 RAP for
2K LCSS, 11-050-
120, 11-360-120 RAP
for 1K LCSS, 11-050-
120, 11-360-120 RAP
for HVF
Instruct customer 11-571 Output tray nearly full
Each booklet must not
exceed 15 sheets
Perform 11-063-171,
11-411-171 RAP
11-572 Output Tray full. Please
empty the Output Tray.
Requires two or more
sheets to enable sta-
pling
Switch off the
machine then switch
on the machine, GP
14. Perform 11B-171
RAP
11-573 Output tray nearly full
Perform 11-130-110,
11-132-110 RAP for
2K LCSS, 11-130-
120, 11-132-120 RAP
for 1K LCSS, 11-130-
171, 11-132-171 RAP
for HVF
Perform 11-140-110,
11-142-110 RAP for
11-574 Output Tray full. Please
2K LCSS, 11-140-
empty the Output Tray.
120, 11-142-120 RAP
11-575 Output tray nearly full
for 1K LCSS, 11-140-
171, 11-142-171 RAP
11-598 Output Trays out of ser-
for HVF
vice. Remove all paper
from Output Trays.
May 2013
2-615
Table 10 11-5XX to 9XX Status codes
Reason for Message
Bin status message received
from the finisher indicating bin 2
out of service
Fifty additional prints have been
sent to bin 0 since 90% full sen-
sor made
Bin 0 90% full sensor made
Fifty additional prints have been
sent to bin 1 since 90% full sen-
sor made
Bin 1 90% full sensor made
Finisher bin 2 full
Bin 2 90% full sensor made
Output trays have reached
there capacity.
Reference / Action
Perform 11-140-110,
11-142-110 RAP for
2K LCSS, 11-140-
120, 11-142-120 RAP
for 1K LCSS, 11-140-
171, 11-142-171 RAP
for HVF
Perform 11-130-110,
11-132-110 RAP for
2K LCSS, 11-130-
120, 11-132-120 RAP
for 1K LCSS, 11-130-
171, 11-132-171 RAP
for HVF
Perform 11-130-110,
11-132-110 RAP for
2K LCSS, 11-130-
120, 11-132-120 RAP
for 1K LCSS, 11-130-
171, 11-132-171 RAP
for HVF
Perform 11-030-110,
11-334-110, 11-335-
110, 11-336-110 RAP
for 2K LCSS, 11-030-
120, 11-334-120, 11-
335-120, 11-336-120
RAP for 1K LCSS, 11-
460-171 to 11-462-
171 RAP for HVF
Perform 11-030-110,
11-334-110, 11-335-
110, 11-336-110 RAP
for 2K LCSS, 11-030-
120, 11-334-120, 11-
335-120, 11-336-120
RAP for 1K LCSS, 11-
460-171 to 11-462-
171 RAP for HVF
Perform 11C-171
RAP
Perform 11C-171
RAP
Cleared when con-
firm button pressed
Status Indicator RAPs
OF4a