Rep 8.30 Tray 3 Transport Roll Assembly (W/O Tag 151) - Xerox WorkCentre 5790 Series Service Manual

5. Remove the idler roll and shaft, Figure
1
Move the tabs to remove
the idler rolls and shaft.
Figure 4 Idler roll and shaft removal
Replacement
Replacement is the reverse of the removal procedure.
Repairs/Adjustments
REP 8.29, REP 8.30
4.

REP 8.30 Tray 3 Transport Roll Assembly (W/O TAG 151)

Parts List on PL 8.35
Removal
Switch off the electricity to the machine,
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove tray 3 transport assembly,
May 2013
4-150
WARNING
GP 14. Disconnect the power cord from the
WARNING
REP 8.13.
Xerox® WorkCentre® 5790 Family