Table of Contents
Advertisement
HVF Tags
TAG:
V-001
CLASS:
2
NAME:
Modification to the inserter connector
PURPOSE:
Pin 3 (ground 24V) and pin 4 (24V) on the bulk head connector on the HVF for
the inserter unit are to close together and could be shorted. On the HVF PWB,
PJ703 pins 2 and 3 are repositioned. On the Inserter PWB, PJ5 pins 2 and 3
are repositioned. This changes the position of the ground 24V.
KIT NUMBER:
PARTS LIST ON:
-
TAG:
V-002
CLASS:
5
NAME:
Lower paddle switch
PURPOSE:
Mod TAG002 may have been struck in manufacturing, but is not a valid mod
tag.
KIT NUMBER:
PARTS LIST ON:
-
TAG:
V-003
CLASS:
5
NAME:
Guide hinge pin
PURPOSE:
Mod TAG003 may have been struck in manufacturing, but is not a valid mod
tag.
KIT NUMBER:
PARTS LIST ON:
-
General Procedures/Information
HVF Tags, Tray 6 Inserter Tags
TAG:
V-004
CLASS:
5
NAME:
Paper base middle bearing
PURPOSE:
Mod TAG 004 may have been struck in manufacturing, but is not a valid mod
tag.
KIT NUMBER:
PARTS LIST ON:
-
TAG:
V-005
CLASS:
5
NAME:
Three blade lower paddle.
PURPOSE:
To improve the contact force on documents in the ejector assembly.
KIT NUMBER:
PARTS LIST ON:
-
TAG:
V-006
CLASS:
4
NAME:
HVF Performance improvement
PURPOSE:
Modifications to HVF sub-assemblies for improving overall performance and
reliability of the finisher module, refer to
KIT NUMBER:
PARTS LIST ON:
-
TAG:
V-007
CLASS:
5
NAME:
Ejector with removable paddle assembly
PURPOSE:
Allows replacement of ejector paddle assembly without needing to replace
entire ejector.
KIT NUMBER:
PARTS LIST ON:
PL 11.140
May 2013
6-136
ADJ 11.13-171
Xerox® WorkCentre® 5790 Family
Advertisement
Chapters
Table of Contents
