Table of Contents
Advertisement
TAG:
F-005
CLASS:
5
NAME:
LCSS elevator motor encoder sensor.
PURPOSE:
A new sensor with an improved response time.
KIT NUMBER:
PARTS LIST ON:
PL 11.10 Item 11
TAG:
F-006
CLASS:
4
NAME:
LCSS hole punch field repair kit.
PURPOSE:
To implement an adjustment for the LCSS hole punch, for machines with TAG
F014 installed, in order to return the LCSS to manufactured specification. All
WC5790F machines with an LCSS hole punch are manufactured with TAG
F006.
KIT NUMBER:
PARTS LIST ON:
PL 11.6
TAG:
F-007
CLASS:
5
NAME:
LCSS rear frame cutout modified.
PURPOSE:
Change to the cutout in the rear frame to accommodate all configurations of
hole punches
KIT NUMBER:
-
PARTS LIST ON:
-
Xerox® WorkCentre® 5790 Family
TAG:
F-008
CLASS:
4
NAME:
LCSS legal 2 hole enable kit.
PURPOSE:
For use on machines with TAG F007 installed. TAG F008 moves the position of
the punch sensor Q11-110. All types of hole punch (2 hole, 3 hole, 4 hole,
Swedish and Legal SEF) are compatible with TAG F008.
KIT NUMBER:
PARTS LIST ON:
PL 31.10 Item
TAG:
F-009
CLASS:
4
NAME:
Sharp edges removed from area 5 (safety)
PURPOSE:
To make safe the customer interaction area around the hole punch.
KIT NUMBER:
-
PARTS LIST ON:
-
TAG:
F-010
CLASS:
4
NAME:
20 ohm tamper motor
PURPOSE:
To eliminate the tamper motor from stalling.
KIT NUMBER:
-
PARTS LIST ON:
PL 11.16
TAG:
F-011
CLASS:
4
NAME:
Re-routed harness
PURPOSE:
To improve the routing of the staple harness by using a longer harness.
KIT NUMBER:
-
PARTS LIST ON:
-
May 2013
6-133
6,
PL 11.6
General Procedures/Information
1K LCSS Tags, 1K LCSS Tags
Advertisement
Chapters
Table of Contents
