Xerox WorkCentre 5790 Series Service Manual page 601

20-342 Fax File Integrity Fault RAP
20-342 An error has occur when accessing the file on a non-volatile device.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Make a backup of the phone book and the customer settings, using the NVM save and restore
tool on the PWS. Refer to Portable Work Station and Tools,
Procedure
Switch off the machine, then switch on the machine,
Y N
Perform SCP 6 Final Actions.
(W/O TAG X-001) The compact flash, PL 20.10 Item 3
Y N
Remove, then re-install the compact flash memory,
new compact flash memory, PL 20.10 Item
Clear the fax card NVM. Go to dC132 NVM Initialization. Select Embedded Fax NVM initialisa-
tion. Perform the routine, Reformat. The fault is cleared.
Y N
Reload the software, GP 4.
Perform SCP 6 Final Actions.
Xerox® WorkCentre® 5790 Family
WARNING
GP 5.
GP 14. The fault still occurs.
is installed correctly.
PL 20.10 Item 3. If necessary install a
3.
20-701 Fax Phone Book Download Failed Entry RAP
20-701 The fax phone book down load failed.
Procedure
Go to the relevant procedure:
• (W/O TAG X-001) 20-701A
• (W/TAG X-001) 20-701B Fax Phone Book Download Failed RAP (W/TAG X-001).
May 2013
2-569
Fax Phone Book Download Failed RAP (W/O TAG X-001).
Status Indicator RAPs
20-342, 20-701