Xerox WorkCentre 5790 Series Service Manual page 1078

REP 11.46-171 HVF Stacker Exit Feed Roll
Parts List on PL 11.155
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the HVF front door, top cover, front cover and rear cover,
2. Figure 1. Remove the circlip and bush
Figure 1 Circlip and bush removal
Repairs/Adjustments
REP 11.46-171
WARNING
GP 14. Disconnect the power cord
WARNING
REP 11.1-171.
1
Remove the circlip
and the bush
3. Figure 2. Remove the stacker exit feed roll.
Figure 2 Stacker exit feed roll removal
Replacement
The replacement procedure is the reverse of the removal procedure.
May 2013
4-340
1
Remove the idler, (1 screw)
2
Remove the circlip, pulley and bush
3
Remove the stacker exit feed roll
REAR VIEW
Xerox® WorkCentre® 5790 Family