Xerox WorkCentre 5790 Series Service Manual page 1071

3. Figure 2. Remove the BM diverter gate.
2
Remove the
pivot screw
Figure 2 Diverter removal
Replacement
The replacement procedure is the reverse of the removal procedure.
Xerox® WorkCentre® 5790 Family
REP 11.40-171 HVF Input Roll
Parts List on
Removal
Switch off the electricity to the machine. Refer to
1
from the customer supply while performing tasks that do not need electricity. Electricity
Open Guide 5b
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1.
2.
3
Remove the
diverter gate
May 2013
4-333
PL 11.155
WARNING
WARNING
Remove the HVF front door, top cover, front cover and rear cover,
Figure 1. Remove the black plastic cover.
Figure 1 Cover removal
GP 14. Disconnect the power cord
REP 11.1-171.
2
Lift out the cover
1
Press in the catches,
(2 places)
Repairs/Adjustments
REP 11.39-171, REP 11.40-171