Xerox WorkCentre 5790 Series Service Manual page 1408

GP 8 Special Tools and Consumables
Description
Refer to the following:
Wear protective gloves when using solvents and cleaning agents,
• Antistatic fluid, PL 26.10 Item 19.
– Cleaning agent.
• Disposable gloves, PL 26.10 Item 10.
– General protection.
• Ethernet crossover cable, PL 26.10 Item
– PWS to machine.
• Film remover, PL 26.10 Item 4.
– Cleaning agent.
• Finisher bypass harness, PL 26.10 Item
– Electrical cheat for PJ151.
• Formula A cleaning fluid, PL 26.10 Item
– General cleaning.
• Lens and mirror cleaner, PL 26.10 Item
– Optics cleaning.
• Micro fiber wiper, PL 26.10 Item 13.
– General cleaning.
• 9 way gender changer/null modem adapter
– PWS to machine.
• Plastislip grease, PL 26.10 Item 8.
– Lubrication for plastic gears and components.
• Serial cable, PL 26.10 Item 12.
– PWS to machine.
• Staple cartridge, PL 26.10 Item 11.
• Test pattern, A3/11X17, PL 26.10 Item
– IQS 1 Solid Area Density and IQS 2 Background.
• Test pattern, A4, PL 26.10 Item 15.
– IQS 1 Solid Area Density and IQS 2 Background.
• Test pattern, 8.5 X 11, PL 26.10 Item
– IQS 1 Solid Area Density and IQS 2 Background.
• Test pattern, solid area density scale,
– IQS 1 Solid Area density.
• Test pattern, visual scale, PL 26.10 Item
– IQS 2 Background.
• USB cable, PL 26.10 Item 5.
– PWS (portable work station) to single board controller PWB.
• Xerox approved USB pen drive.
General Procedures/Information
GP 8, GP 9
WARNING
PL 26.10 Item
6.
7.
2.
9.
PL 26.10 Item 1.
14.
16.
PL 26.10 Item 17.
18.
GP 9 Secure Diagnostic
Purpose
The purpose is to provide increased security to Diagnostics pathways.
Use this procedure when the diagnostics entry code 1934 has been compromised or added
security has been requested by the customer.
10.
How to Enable Secure Diagnostics
1. Enter diagnostics, GP
2. Select Diagnostics Routines.
3. Select Copier Routines.
4. Select 131 NVM Read / Write.
5. Select 03 Machine Run Control.
6. Select Location 03-900 Restrict Diag Pin.
NOTE: The default PIN is 1962. The PIN must be between 1000 and 99999999.
To change the secure diagnostics PIN:
a. Select Read / Write.
b. Enter a new PIN using the key pad.
NOTE: The secure diagnostic PIN has to be a number that has been agreed by the
team or district (e.g. team telephone number or the last 5 digits of the machine serial
number).
c. Press Save.
d. In the options window, press OK.
e. Check that the new secure diagnostics PIN is displayed in the 03-900 Value volume.
f. To return the secure diagnostics entry PIN to default, press the Reset and Save.
7. Select 131 NVM Read / Write.
8. Select 08 Paper feed / Transport.
9. Select Location 08-900 Enable Diag Access.
a. Select Read / Write.
b. Use the key pad to change value from 0 to 1 to enable then press Save.
c. To reset the value to 0, press Reset and Save.
10. Exit diagnostic and complete the Call Closeout procedure.
NOTE: If the PIN has been forgotten, contact your technical specialist.
May 2013
6-24
1.
Xerox® WorkCentre® 5790 Family