Xerox WorkCentre 5790 Series Service Manual page 1073

REP 11.41-171 HVF Inserter Guide Roll
Parts List on PL 11.155
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the HVF front door, top cover, front cover and rear cover,
2. Open guide 8a.
3. Figure 1. At the front of the HVF, remove the circlip and the bush.
Figure 1 Circlip and bush removal
Xerox® WorkCentre® 5790 Family
WARNING
GP 14. Disconnect the power cord
WARNING
REP 11.1-171.
1
Remove the circlip
and the bush
4. Figure 2. At the rear of the HVF, remove the inserter guide roll.
Figure 2 Inserter guide roll removal
Replacement
The replacement procedure is the reverse of the removal procedure.
May 2013
4-335
1
Remove the circlip
2
Slide the pulley and the
bush along the shaft
3
Slip the belt off of
the pulley
4
Remove the pulley and
the bush
5
Remove the inserter
guide roll
REAR VIEW
Repairs/Adjustments
REP 11.41-171