Xerox WorkCentre 5790 Series Service Manual page 642

Table 6 07-5XX Status codes
Status
Code UI Message Reason for Message
07-590 Replace tray 5 feed rolls The feed head counter has
reached the end of life figure
07-592 Check the settings for tray Tray 2 closed or size change
from power-on
Table 7 08-5XX Status codes
Status
Code UI Message Reason for Message
08-548 Clear jam from right hand Sheet did not clear the wait
side of Tray 5 sensor within the expected
time
08-550 Open left hand door Sheet over wait sensor
08-551 Open left hand door Tray 1 feed sensor detects
paper in feed area on power-
on or in standby, 08-101
08-552 Open left hand door Tray 2 feed sensor detects
paper in feed area on power-
on or in standby. 08-102
08-553 Open tray 3 Tray 3 feed sensor detects
paper in feed area on power-
on or in standby. 08-103
08-554 Open left hand door Tray 4 feed sensor detects
paper in feed area on power-
on or in standby. 08-104
08-555 Open front door Registration sensor detects
paper in registration area on
power-on or in standby. 08-150
08-556 Open front door Paper in duplex path at power-
on or in standby
08-557 Open left hand door Paper over the registration
sensor when feeding from the
bypass tray
08-558 Clear jam in Tray 5 Sheet over the feed sensor
08-561 Open tray 1 Sheet near Tray 1 feed sensor.
08-106
08-562 Open tray 2 Sheet near Tray 2 feed sensor Jam clearance. Per-
Status Indicator RAPs
OF4a
Status
Reference / Action Code UI Message
Install new tray 5 feed 08-563 Open tray 3
rolls, PL 8.45 Item 2
Confirm the attributes
or open the tray
08-564 Open tray 4
08-565 Open left hand door
Reference / Action
Perform 08-115, 08-
08-566 Open front door
117 RAP
Jam clearance. Per-
08-567 Open left hand door
form 08-100 RAP
Jam clearance. Per-
form 08-101 RAP
08-568 Clear jam in Tray 5
Jam clearance. Per-
08-570 Post jam clearance initial
form 08-102 RAP
is at ion in progress
Jam clearance. Per-
form 08-103, 08-113
08-580 Paper jam not fully cleared A stray sheet has been
RAP. If the fault
remains, check the
tray 3 exit sensor, refer
to the 08-131 RAP.
Jam clearance. Per-
08-590 An unexpected time-out
form 08-104, 08-114
was detected for a sheet in
RAP
the paper path. This may
Jam clearance. Per-
be due to a different paper
form 08-150, 08-151
in the trays than the
RAP
machine expects. Please
Jam clearance. Per-
check and confirm the con-
form 08-160, 08-161
tents of the paper trays
RAP
Jam clearance. Per-
form 08-155, 08-156
RAP
Jam clearance. Per- Status
form 08-115, 08-117 Code UI Message
RAP
09-540 Xerographic Module
Jam clearance. Per-
cleaning in progress.
form 08-106 RAP
Please wait
form 08-106 RAP
May 2013
2-610
Table 7 08-5XX Status codes
Reason for Message Reference / Action
Sheet near Tray 3 feed sensor Jam clearance. W/O
TAG 151
107
Perform
check the tray 3 exit
sensor
Sheet near Tray 4 feed sensor Jam clearance. Per-
form
Sheet near registration sensor Jam clearance Per-
form
RAP
Sheet near duplex sensor Jam clearance. Per-
form
RAP
Paper over the registration Jam clearance. Per-
sensor when feeding from the form
bypass tray RAP
Paper did not reach the tray 5 Clear jam or perform
feed sensor in time 08-115, 08-117
The IOT and finisher device Status clears on com-
are performing the post jam pletion of initialization
clearance initialization pro- process
cess to check for stray sheets
Jam clearance. Per-
detected in either the IOT or form
finisher device during the post
jam clearance initialization rou-
tine. 08-190
Unexpected event or time-out Perform
for sheet. 08-171, 08-181, 08- 08-181
182 RAP
Table 8 09-5XX Status codes
Reason for Message Reference / Action
The Scorotron cleaning is in Refer to
progress 342
ing Failure RAP
Xerox® WorkCentre® 5790 Family
Perform 08-
RAP. W/TAG 151
08-131 RAP,
08-108A RAP
08-150, 08-151
08-160, 08-161
08-155, 08-156
RAP
08-190 RAP
08-171 RAP,
RAP, 08-182
09-341, 09-
Scorotron Clean-