Rep 11.1-110 2K Lcss Covers - Xerox WorkCentre 5790 Series Service Manual

REP 11.1-110 2K LCSS Covers

Parts List on PL 11.2.
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the covers, Figure 1.
Xerox® WorkCentre® 5790 Family
WARNING
GP 14. Disconnect the power cord
WARNING
NOTE: Removing the top cover first will allow easy removal of the front and rear covers.
3
Open the front
door, remove
four screws.
Figure 1 Removing the covers
Replacement
Reverse the removal procedure to replace the covers.
May 2013
4-233
1
Open the exit cover,
remove two screws.
2
Remove
the top
cover.
4
Remove the
front door cover
assembly.
Repairs/Adjustments
REP 11.1-110
6
Remove the
rear cover
assembly.
5
Remove two
screws.