Xerox WorkCentre 5790 Series Service Manual page 1022

REP 11.5-171 Right Side-Cover Removal
Parts List on PL 11.135
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. With the machine powered, use the PTU or control code 11-032 to lower Bin 1.
2. Remove bin 1, REP 11.4-171, then remove the right side cover,
Repairs/Adjustments
REP 11.5-171
WARNING
GP 14. Disconnect the power cord
WARNING
Figure 1.
3. Remove 6 screws then remove the right side-cover,
Replacement
Reverse the removal procedures to reinstall the right side cover.
May 2013
4-284
Figure 1.
1
Lower the lifting bar
2
Remove 6
screws
Figure 1 Right side cover
Xerox® WorkCentre® 5790 Family