3.
Figure
2. At the front of the HVF, remove the circlip and bush.
Remove the circlip
and bush
Figure 2 Circlip and bush removal
Repairs/Adjustments
REP 11.40-171
4.
Figure
3. At the rear of the HVF, remove the input roll.
1
Remove the circlip
Replacement
The replacement procedure is the reverse of the removal procedure.
May 2013
4-334
5
Remove the input roll
4
Remove the pulley and
the bush
3
Lift the shaft and remove
the belt from the pulley
2
Slide the pulley and the
bush along the shaft
REAR VIEW
Figure 3 Input roll removal
Xerox® WorkCentre® 5790 Family