Initialize The File System (Initialize Hdd); Initialize The Db (Initialize Db) - Toshiba e-STUDIO477S Service Manual

[C] Initialize the File System (Initialize HDD)
In case that an error occurs during the file system check and the partition cannot be recovered with the
recovery, each partition can be initialized.
It is recommended to export the user information such as address book before performing this function.
File System(F/S) Recovery Mode -> Initialize HDD
Please Select Partition
1. Except /
2. /work
3. /registration
4. /backup
5. /imagedata
6. /storage
7. /encryption
8. /TAT
Explanation for each item
• 1: Initializes partitions other than root one and creates initial files.
• 2: Initializes a partition (/work) and creates an initial file.
• 3: Initializes a partition (/registration) and creates an initial file.
• 4: Initializes a partition (/backup) and creates an initial file.
• 5: Initializes a partition (/imagedata) and creates an initial file.
• 6: Initializes a partition (/storage) and creates an initial file.
• 7: Initializes a partition (/encryption) and creates an initial file.
• 8: Initializes a partition (/TAT) and creates an initial file.
Remarks:
More than one partition can be selected. (">" is displayed on the left of the selected number.)
Notes:
• If [1. Except /] is selected, minimal data necessary for normal startup are automatically
recovered.
• If [1. Except /] is selected, log database is also initialized. Back up the data before initializing if
necessary.
• If [1.Except/] is selected, do not perform SRAM data formatting (Clear SRAM) before the
normal start-up.
[D] Initialize the DB (Initialize DB)
In case that particular service calls occur or there is a possibility of damage to the databases, each
one can be initialized.
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-17
3 - 25
e-STUDIO477S/527S/477SL
SELF-DIAGNOSTIC MODE
3