Exit Roller - Toshiba e-STUDIO2006 Service Manual

(5) Release 3 latches and take off the exit
sensor [5].
(6) Disconnect the connector.
4.8.12

Exit roller

(1) Take off the tray rear cover.
 P. 4-4 "4.1.8 Tray rear cover"
(2) Remove 1 clip [1] and take off 1 bushing [2].
(3) Unhook the grounding spring [3].
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 92
[5]
Fig. 4-244
[2]
[1]
Fig. 4-245
[3]
Fig. 4-246